Bio-press BT 40 for oil extraction

Type 40 oil press

This model is built with the finest materials and features a hardened thrust bearing and wear parts. An oil press designed for continuous operation

It doesn't need much space.

It can be used for those who want to be self-sufficient in oil and to make pellets for heating or food supplements. About BT oil presses

BT presses always seek to achieve high levels of quality and energy efficiency. With a BT oil press you can produce your own oil as well as a biological product in the form of pellets for fuel or supplemental feed.

Cold process without alteration of properties

Seeds and pits for pressing

You can use almost any type of seeds or pits for pressing, for example:

• Rapeseed (Canola)
• Sunflower
• Almond
• apricot pits
• Grains Linseed oil
• jatropa
• Mustard
• Soy
• macadamia nuts
• grape seeds
• prickly pear seeds
• peanuts etc.

Although not tested, theoretically other products that have adequate oil percentage and humidity can be used for example some seaweed

Use of rapeseed oil

• Rapeseed oil can be used in a conventional boiler, mixed with the heating fuel.
• A common burner can use this oil in the mixing ratio of 50% rapeseed oil.
• If you use 100% rapeseed oil, then it requires a special burner attached to the boiler.
• Canola oil can also be used to heat large spaces with a waste oil heater.
• Homemade rapeseed or sunflower oil is also great for cooking and gives a nice flavor.

All our products have the European CE marking.

At the top of the tests

BT Oil Presses have been placed at the top in tests carried out by national bodies in several countries due to the low dust content in the oil and the higher net benefit of pressed rapeseed.

Maximum yield - maximum oil yield per rapeseed kg approx. 33-39%. (Rapeseed oil content is approx. 40-45%)

A minimum amount of waste per kg. oil and very solid and durable pellets due to the high oil extraction per kg. of seed and can be stored for a long time, far above any other competing oil presses.